10/26/2020 01:43:00 pm

Element turns 4, spanning 38 countries worldwide

Element Group is due to celebrate its four year anniversary on 26 October 2020. Over four years, the producer of wear and spare parts for mining equipment has been doubling order volume annually, enhancing the dealer and manufacturer network.

Element Group has been manufacturing, delivering, and maintaining wear and spare parts under its own trademark, Element, since 2016. Over four years, a small company based in Tampere city, Finland, grew into a multinational corporation, claiming market leadership in Eurasia and other parts of the globe.

10/26/2020 01:43:00 pm
10/14/2020 10:25:00 am
10/14/2020 10:25:00 am

Element will expose lining plates samples at MiningWorld Russia 2020

At the Mining World Russia 2020, the Element Group specialists will present the most demanded lining plates for different conditions of use. 

From 20 to 22 October, the Element Group will have a part in the 24-th international exhibition of machines and equipment for mining companies MiningWorld Russia 2020. 

At the expo, the specialists of the company will exhibit six types of plates that are designed to reduce maintenance costs: rubber-ceramic and polyurethane-ceramic, polyurethane, polyethylene, steel wear-resistant, and bimetal lining plates.

10/08/2020 05:02:00 pm

Marko Salmela has headed up Element Group

The Element Group Directing Council has assigned Marko Salmela as a Chief Executive Officer. Along with the new CEO, Marat Abdurakhimov has been transferred to the position of Senior Vice President.

Before heading up the Element Group the past 8 months Marko Salmela worked as a Vice President in European, African and Middle East Market Area. “In the month of October, we will celebrate the fourth birthday of Element Group. During this time our company has been maintaining substantial growth. I am happy to say that we as a company are now ready to enter the next year fulfilling the Group ambition: to become a global market leader”, he commented.  

09/17/2020 10:43:00 am

Element has inspected the installation of a mill lining

Element has recently installed a mill lining, in addition to commencing the operation of a ball mill, at one of the largest metallurgical and mining enterprises in the world.

Our client’s main problem was the low service life of linings from local suppliers. Our goal, in this case, was very clear – to choose the material fit for the operating conditions of the mill and make linings that will last 20% longer than the linings of previous suppliers.

For the mill, we chose C2 grade austenitic manganese steel, specially developed by Element for this type of application. We guarantee the customer a minimum lining kit operating time of 8,700 hours, provided that the technological parameters of the crusher are met.

08/28/2020 04:25:00 pm

Element has released a new product – The NovaTHOR compound

Element has released its first fill for cone, gyratory crushers, and mills. Sales will start in the Eurasian and EMEA regions through Element's regional offices and dealer representative offices in 20 countries.

NovaTHOR — a two-component compound based on an epoxy resin for filling the cavities between the surfaces of wear and body parts. Improved shock absorption properties, high impact resistance, and compressive strength are the main characteristics of the compound. Because of this, the filling effectively absorbs energy and reduces vibration. NovaTHOR is resistant to shrinkage and temperature influences, so it is suitable for even the most severe of application conditions.

08/03/2020 10:00:00 am
08/03/2020 10:00:00 am

Element expands its dealer network in the EMEA

The Element brand expands its presence throughout the EMEA region and enhanced the number of dealers and representative offices in 20 countries. To date, the company has signed partnership agreements with companies from Poland, Ukraine, Turkey, Bahrain, Saudi Arabia, Morocco, Egypt, Greece, Ghana and Israel. Companies from South Africa, the United Arab Emirates, Zimbabwe, Serbia and Bulgaria are planning to join the partner network.

05/29/2020 11:53:00 am

Element repaired the bottom frame of a crusher

Our service team completed a full restoration of the cone crusher bottom frame. The customer was one of the aggregate enterprises in the Ural Region of Russia.

All parts are restored according to the technical specifications and design documentation of Element. The warranty for our work is six months or 1000 hours, whichever comes first.

05/08/2020 12:11:00 pm

Element successfully completed industrial liners testing on the Uralmash KSD 3000 crusher

Element finished industrial testing of the liners on the Uralmash KSD 3000 crusher at one of Severstal's factories. Our guarantee to the processing was 2 million tons of rock, but the liners successfully processed 2 369 189 tons of rock (it is 18,5% more!).

The average productivity of the crusher was 1160 tons per hour.

04/29/2020 04:29:00 pm

New supply of spares for pumps

A new batch of components for hydraulic transport equipment has arrived at the Element storehouse. In the production of pump components, we use three different alloys of high-chromium cast iron and several types of acid-resistant rubber.

Thanks to its own Design Engineering Department, Element promptly modifies the parts to meet the customer’s requirements.

Find your parts by article

We use cookies to enhance your browsing experience, analyze site traffic and serve tailored advertisements. By continuing to browse or closing this banner, you consent to our use of cookies. Read more about how we use cookies.Cookie Policy